Pipe Tee

Pipe Tee

Description

Pipe tee fittings are used to connect a branch pipe at 90 degrees to the main run pipe and are one of the most commonly used fittings in industrial piping systems. Pipe tees are available in equal tee and reducing tee configurations depending on whether the branch diameter is the same as the run pipe or smaller.

In industrial piping systems, pipe tees are typically installed together with butt weld fittings, pipes and pipe flanges to form complete piping assemblies and branch connections. Pipe tees are widely used in process piping systems where fluid distribution, mixing or diversion is required.

Pipe tee fittings are commonly used in petrochemical plants, offshore platforms, refineries, LNG facilities, power plants and heavy industrial piping systems.

Specifications / Standards

Pipe tees are manufactured according to international piping standards to ensure dimensional compatibility, welding quality and pressure rating compliance.

Typical standards include:

ASME B16.9 – Factory-Made Butt Welding Fittings
ASME B16.28 – Short Radius Fittings
MSS SP-75 – High Yield Butt Weld Fittings
EN 10253-2 – Butt Weld Fittings for Pressure Purposes
EN 10253-4 – Stainless Steel Butt Weld Fittings
ASTM A234 – Carbon Steel Pipe Fittings
ASTM A403 – Stainless Steel Pipe Fittings
ASTM A815 – Duplex Stainless Steel Pipe Fittings
ASTM B366 – Nickel Alloy Pipe Fittings
EN 10204 – Inspection Certificates

Often supplied together with stainless steel pipe fittings and piping materials for complete piping material packages in EPC and industrial projects.

Material Grades

Can be manufactured in carbon steel, stainless steel, duplex stainless steel and nickel alloys depending on corrosion conditions, temperature and pressure requirements.

Carbon Steel

ASTM A234 WPB
ASTM A420 WPL6

Stainless Steel

ASTM A403 WP304 / 304L
ASTM A403 WP316 / 316L
ASTM A403 WP321
ASTM A403 WP347

Duplex & Super Duplex

ASTM A815 UNS S31803
ASTM A815 UNS S32205
ASTM A815 UNS S32750
ASTM A815 UNS S32760

Nickel Alloys

ASTM B366 UNS N06625
ASTM B366 UNS N08825
ASTM B366 UNS N10276

Material grades are selected according to project specifications, corrosion allowance and operating conditions.

Size Range

Typical size range for pipe tees:

Size Range: 1/2″ to 72″
Wall Thickness: SCH 5S – SCH XXS
Types:
Equal Tee
Reducing Tee
Manufacturing Types:
Seamless Tee
Welded Tee
Fabricated Tee

Special sizes and custom tees can be manufactured according to project drawings and piping isometrics.

Manufacturing Process

The manufacturing process for pipe tees typically includes:

Raw material pipe selection
Cutting and preparation
Hot forming / Cold forming
Branch forming
Heat treatment
Bevel machining
Surface treatment (Pickling / Passivation / Shot blasting)
Marking and traceability identification
Inspection and testing
Packing and shipment

All are fully traceable from raw material heat number to final inspection documentation.

Inspection & Testing

Inspection and testing may include:

Visual inspection
Dimensional inspection
PMI (Positive Material Identification)
Mechanical testing
Hardness testing
Ultrasonic testing (UT)
Dye penetrant testing (PT)
Magnetic particle testing (MT)
Radiography testing (RT) for welded tees
Hydrostatic testing (if required)
Third-party inspection (SGS / BV / TUV / DNV)

Inspection certificates can be supplied according to EN 10204 3.1 or 3.2.

Applications / Industries

Pipe tees are widely used in industrial piping systems across various industries:

Oil & Gas
Petrochemical
Offshore & FPSO
LNG & Gas Processing
Power Plants
Nuclear Industry
Chemical Plants
Desalination Plants
Shipbuilding
Heavy Industry

Commonly used in process piping systems, utility piping systems, cooling water systems and distribution piping systems.

Packaging & Delivery

Pipe tees are packed to prevent damage during transportation and storage.

Typical packing methods include:

Wooden cases
Plywood boxes
Pallets
Waterproof wrapping
End protection
Heat number marking
Packing list and traceability documentation

Export packing is suitable for sea freight, air freight and project site delivery.

Why Choose Us

We supply pipe tee fittings for industrial piping projects with complete material traceability, inspection documentation and project packaging requirements.

Our pipe tees are supplied to EPC contractors, fabrication workshops, offshore projects, petrochemical plants and power plant projects where documentation, quality control and delivery reliability are critical.

We support complete piping material supply including pipes, fittings, flanges, forgings and prefabrication pipe spools, ensuring compatibility between all piping components and project specifications.